Welcome to the official website of HUNAN DAOSHI MEDICAL TECHNOLOGY CO., LTD!
24 hour consultation hotline£º

0731-85530236


CONTACT US
HUNAN DAOSHI MEDICAL TECHNOLOGY CO., LTD.
Contact Tel:0731-85530236
EMAIL£ºdashingtech@163.com
Address£ºChangsha E Center, Liuyang National Biomedical Park, Changsha City

COMMON PROBLEM

Position:Homepage > NEWS

How to provide emergency treatment for chemical burns?

Author:daoshi Source:Baidu Wenku Time:2026-07-20

If you unfortunately come into contact with chemicals, you should quickly remove your clothes and immediately rinse the affected area with plenty of water for more than 15 minutes.


When cleaning, cover all affected areas to prevent substance retention. Cleaning the eyes, nose, and mouth should be done quickly and carefully. The flushing of the eyes usually uses physiological saline or clean tap water. When flushing, try not to direct the water flow towards the cornea and do not rub the eyes. You can also immerse your face in clean water, use your hands to support your upper and lower eyelids, and forcefully open your eyes while swinging your head left and right in the water.


For burns on the skin area, after rinsing with clean water, it can be washed with a neutralizing agent for a short period of time, and then rinsed with clean water.

After completing the flushing, it is necessary to seek medical attention promptly based on the extent of the injury and have a doctor provide appropriate treatment.


Fire extinguishing in the initial stage of production equipment


The vast majority of explosions occur in the early stages of fire spread, so how to extinguish them is particularly important. When a fire or explosion accident occurs in a production facility, the operators present should quickly take the following measures:


1. Quickly identify the location, object, and source of the fire, accurately close the relevant valves, and cut off the material and heating sources; Activate fire-fighting facilities for cooling or isolation; Close the ventilation system to prevent the spread of fire;


2. In case of fire caused by material leakage inside the pressure vessel, the feeding should be cut off and the pressure relief valve should be opened in a timely manner for emergency evacuation; To facilitate firefighting, discharge materials into the torch system or other safe locations;


3. On duty personnel on site should make timely decisions on whether to stop the vehicle, report the situation to the factory dispatch room in a timely manner, and report to the fire department;

After a fire occurs, personnel should be quickly organized to take accurate process measures for the device and use existing fire-fighting facilities and equipment to extinguish the fire. If the fire is difficult to extinguish temporarily, measures should be taken to prevent the spread of the fire, protect critical areas, and transfer dangerous goods;


When professional firefighters arrive at the fire scene, they should proactively and promptly introduce the situation to the fire command personnel.
QQ